NACHI UKFL307+H2307 bearing units

T:42.5 mm; Dimension series:7GB; B:39 mm; a:51.517 mm; Da max.:159 mm; db min.:93.5 mm; da max.:97 mm; rb max.:2.5 mm; Ca min.:5 mm; Cb min.:15.5 mm;

A:4 mm; G:Tr 420x5; d:420 mm; Hydraulic nut:HMV 84E; G3:9 mm; B1:168 mm; G2:M 6; Locking device:MS 3084; B:52 mm; Mass adapter sleeve assembly:37.6 kg;

P90°:11.1 kN; Pa:2.4 kN; H:98.822 mm; Bearing:22207 EK; Appropriate attachment bolt size G:0.5 in; PG:1/8 NPT; Adapter sleeve assembly:SNW 7x1.1/4; Taconite seal:TER 14; h:22.225 mm; Stabilizing ring:36053-6;

P180°:20 kN; Ca:55.804 mm; P150°:16.5 kN; End plug (suffix Y):EPR 7; P60°:49.4 kN; R1:49.212 mm; Max. speed for Taconite seal:1075 r/min; H1:82.55 mm; Cap bolt, SAE grade:8; h:34.925 mm;

D:62.0000 mm; Oil Speed Rating Open/Shielded n2:13000 rpm; Accessories:Without Accessories; d:17.000 mm; Fillet Radius ra:1.00 mm; Basic Static Radial Load Rating Co:14600 N; Basic Dynamic Radial Load Rating C:23300 N; B:17.00 mm; Grease Speed Rating Open/Shielded n1:11000 rpm;

Basic Dynamic Radial Load Rating:5730 lbf; Dimension G:0.3750 in; Weight W:1.70 lb; Dimension J:1.6250 in; Insert Bearing IB:ZMaRC; Dimension D2:3.0000 in; Dimension H:1.1563 in; Basic Static Radial Load Rating Co:3440 lbf; Dimension C:3.5000 in; Shaft Diameter D:1 1/4 in;

Basic Radial Load Rating-Dynamic DC:130000 N; Type:200-RDM Series (from; Speed Rating-Open and Shielded-Oil OSO:12600 rpm; B:30.00 mm; Fillet Radius ra:2.00 mm; D:160.0000 mm; d:90.000 mm; Basic Radial Load Rating-Static SCO:116000 N; Speed Rating-Open and Shielded-Grease OSG:8700 rpm; Fillet Radius

Weight:1.07 kg; B:24 mm; Static (Cor):43.800 kN; Grease:5 300 min-1; D:125 mm; ra:1.5 max; Dynamic (Cr):62.000 kN; d:70 mm; Da:116 max; da:77 min;

d:40 mm; r, r1,2 min.:0.3 mm; F:45 mm; B:17 mm; Mass inner ring:0.043 kg;

B:21.00 mm; Basic Static Radial Load Rating Co:44000 N; Accessories:Without Accessories; D:100.0000 mm; Grease Speed Rating Open/Shielded n1:5200 rpm; Fillet Radius ra:1.50 mm; Basic Dynamic Radial Load Rating C:48400 N; Oil Speed Rating Open/Shielded n2:6300 rpm; d:55.000 mm;

h:15 mm; G:Tr 500x5; b:36 mm; Associated spanner:TMFN 500-600; Associated eyebolt for handling:M 10; B5:85 mm; Mass lock nut:34.9 kg; Lock washer / Locking clip:MS 30/500-96; B:68 mm; d1:550 mm;

r1,2 min.:2 mm; Calculation factor Y2:4.2; K:3 mm; Fatigue load limit Pu:18.6 kN; D1 ≈:96.2 mm; G1:7 mm; Limiting speed:7500 r/min; D:120 mm; B2 ≈:40 mm; Basic dynamic load rating C:159 kN;

B:8.00 mm; Grease Speed Rating n1:25000 rpm; Fillet Radius ra:0.30 mm; Oil Speed Rating n2:32000 rpm; Basic Static Radial Load Rating Co:2500 N; D:28.0000 mm; d:12.000 mm; Basic Dynamic Radial Load Rating C:5070 N;

F:542 mm; db min.:547 mm; r1,2 min.:5 mm; da max.:536 mm; Reference speed:600 r/min; Basic dynamic load rating C:3740 kN; α:20 °; Mass bearing:210 kg; Da max.:674 mm; Fatigue load limit Pu:750 kN;

Dimension D2:2.6875 in; Dimension C:3.5000 in; Dimension J:0.3125 in; Dimension S1:0.8750 in; Weight W:1.10 lb; Basic Static Radial Load Rating Co:2520 lbf; Dimension G:0.5000 in; Pin Dia A1:0.2500 in; Dimension B:4.1250 in; Dimension N:0.7813 in;